Common options for chiller
Optional features
PCU-NE Series
Circulating fluid bypass kit
for PCU-NE1500
Circulating fluid bypass kit
for PCU-NE6000
PCU-SL Series
Caster unit
Automatic fluid fill unit
Circulating fluid bypass kit
PCU-R Series
Circulating fluid bypass kit PCU-P002
This kit is used when the circulating water flow rate is below the rated flow rate. If the circulating water flow rate falls below the rated flow rate, the cooling capacity of the chiller unit may decrease.
Kit contents
| Flexible tube | 2 | Nipple joint | 2 |
|---|---|---|---|
| Nipple joint small × 2 | 2 | Cable tie | 10 |
| packing× 2 | 2 | Seal tape | 1 |
| T-joint | 2 | Insulation material | 3 |
| Globe valve | 1 | Instruction manual | 1 |
Operating precautions
- Recommended tightening torque is 40 to 45 Nm.
- Wind the seal tape clockwise.
- Turn on the PCU after laying the water piping in front of the bypass kit.
- If a water leak or some other problem occurs, stop using immediately.
Tip-resistant hardware PCU-P001
Bracket for securing in the field. It helps to prevent the equipment from overturning.
| Model name | A | B | C |
|---|---|---|---|
| PCU-1600R PCU-W1800R |
541.5 | 276 | 398 |
| PCU-3300R PCU-6300R PCU-W3600R PCU-W6600R PCU-W9100R |
571.5 | 316 | 438 |
External sensor PCU-T005/PCU-T010
The chiller unit body is equipped with a standard external temperature control input terminal.
This allows the unit to switch from normal circulating water temperature control to temperature control of the relevant parts of the workpiece.
