ENC-AR1120L-SUS-2
Cooling capacity(W)
950/1100
External dimensions(mm)
H730×W300×D230
950/1100
External dimensions(mm)
H730×W300×D230
Control panel cooling unit ENC-AR1120EX-SUS-2
Control Panel Cooling unit
Freon-gas Special specifications
Top-mounting
ENC-AR1120EX-SUS-2
ENC Series
Stainless steel panel cooler to realize a high durability.
- Freon-gas
- Special specifications
| Cooling capacity(W) | 950/1100 |
|---|---|
| Rated Voltage(V) | Single-phase 200V AC |
| Mounting type | Top-mounting |
| External dimensions(mm) | H318×W600×D353 |
| Weight(kg) | 28 |
Product Details for ENC-AR1120EX-SUS-2
Specifications
(50／60Hz)
| Mounting type | Top-mounting |
|---|---|
| Cooling capacity(W) | 950/1100 |
| Setting temperature range(℃) | 25 to 45 |
| Ambient Temperature(℃) | 20 to 50 |
| Ambient Humidity(%RH) | 10～85 (No condensation) |
| Dimensions(mm) | H318×W600×D353 |
| Weight(kg) | 28 |
| Coating Color | NSSC 180-HL Finish |
| Rated voltage(V) | Single-phase 200V AC |
| Current consumption : Rating(A) | 2.7/2.4 |
| Current consumption : Max(A) | 3.2/3.3 |
| Starting Current(A) | 7.5/7.1 |
| Power consumption : Rating(W) | 440/470 |
| Power consumption : Max(W) | 570/630 |
| Noise Resistance | LEVEL4 by Fast Transient / Burst Immunity Test |
| Vibration resistance | Equivalent to JIS Z 0200 Level1 |
| Dustproof and splashproof protection grade | Equivalent to IP54 (internal circulation route) |
| Certification | |
| Refrigerant / Amount(g) | R134a 240g |
| Noise (dB (A)) | Approx. 60/65 |
| External output | Cooling operation output/Alarm output (No-voltage/normal open: resistive load 250V 2A) |
| Display | Internal temperature/LED/RUN LED |
Note）
Cooling capacity : Rated capacity value when external temperature is 35°C, internal setting temperature is 35°C. (measurement conditions:JIS-C-9612 air enthalpy method)）
Use area temperature / humidity : Use area temperature / humidity is not meant to satisfy all conditions in temperature and humidity.
Rating Value : 35°C ambient temperature, ambient humidity RH 40%.
MAX value: use area temperature at the maximum use area temperature allowed, use area humidity of 40%RH.
Use area temperature: If the outside air temperature is 0 ° C or lower, set the temperature internal to 30 ° C or higher.
Use the product keeping the use power supply and voltage; within ±10% of rated power supply and rated voltage.
Reading an instruction manual well certainly before use and please use it right.
External dimensions
NC-AR1120EX-SUS-2
（1） Power line : Cord length 3m
（2） Alarm Output Line : Cord length 3m
Diagram of Panel Cutout
Capacity characteristic chart
*Contact our sales representative if you are using the control panel cooler in an environment close to the permissible ambient temperature upper limit.
[Caution]
To ensure proper operation of this equipment, read the operation manual before use.
Product is delivered by truck. (To a designated location in Japan *Island destinations excluded)
Depending on model and quantity, separate charter delivery may be arranged (additional costs apply).
When delivering overseas, special packing for overseas shipment is recommended.
After checking the specifications of the FA cooler, be sure to insert an appropriate breaker (circuit breaker for wiring) between the FA cooler and the power supply.
Using beyond the rated power supply range may cause malfunction.
Perform periodic maintenance.
Neglecting periodic maintenance can degrade unit performance and cause mechanical problems.
Do not allow the FA cooler to operate continuously in winter when the outdoor temperature is low.
When disposing of this unit, do so properly in accordance with laws and regulation.
We're here to give you quick answers to your questions.