Oil chiller VSC-5600S
Oil chiller
End of Sales Model
VSC-5600S
VSC series
High power model that demonstrates its capabilities in a variety of sites.
| Use Area Temperature(℃) | 5～50 |
|---|---|
| Cooling capability(W) | 5200/5600 |
| Power-supply voltage(V) | Three-phase AC200 |
| External dimensions(mm) | H1110×W470×D500 |
| Weight(kg) | 94 |
Product Details for VSC-5600S
Specifications
| Cooling method | Air-cooled type |
|---|---|
| Cooling capacity(W) | 5200／5600 |
| Temperature control range / tuned type(℃) | Set standard temperature ±19.9 |
| Temperature control range / fixed type(℃) | 5～50 |
| Usable Oil | Lubricant, petroleum hydraulic oil (Viscosity:1.4 to 200mm2/s） |
| Circulating oil pressure / inlet side(kPa) | -30.7～0(No fluctuations) |
| Circulating oil pressure /outlet side(kPa) | 0.5 or less(No fluctuations) |
| Use Area Temperature(℃) | 5～50 |
| External dimensions(mm) | H1110×W470×D500 |
| Weight(kg) | 94 |
| Coating Color | Light beige(Munsell No-5Ｙ7.0/1 Semi-gloss) |
| Power-supply voltage(V) | Three-phase AC200 |
| Consumption current(W) | 1650/2100 |
| Voltage source capacity(kVA) | 4.4 |
| Voltage source capacity(kVA) | Rc1/8 |
| Compressor | Fully enclosed rotary |
| Condenser / evaporator | Fins & tubes |
| ファン出力（Ｗ） | 45×2 |
| Certification | CE / ETL |
| Refrigerant / Type | R407C 1150g |
| Noise(dB (A)) | 63 |
| Pump / rated output(W) | 700 |
| Pump / Discharge rate(ℓ/min) | 30.0/36.0 Relief valve set pressure: 0.6MPa (start) |
| Pipe connection / Oil outlet | Rc11/4 |
| Pipe connection / Oil intlet | Rc11/4 |
| Input / output terminals | Remote operation / alarm |
| Protector | High pressure switches, overcurrent relays for pumps, overcurrent relays for compressors, compressor internal thermostats, circuit fuses |
| Overvoltage classification | categoryⅢ according to IEC60664-1 |
| Degree of contamination | degreeⅢ according to IEC60664-1 |
*Cooling capacity, current consumption, and power consumption values are based on a 35ºC room temperature and 35ºC oil temperature (ISO VG5).
*Do not use machining fluids, grinding fluids, water and water soluble liquids, pharmaceutical and food product liquids, gasoline, kerosene, thinner and other highly volatile, low-lubricant fluids, or flame-retardant hydraulic oil.
External dimensions
(1) Operation panel
(2) Filter
(3) legs
(4) Oil piping port (outlet side): RC 3/4
(5) Oil piping port (inlet side): RC 3/4
(6) Oil drain port: RC 1/8
(7) Hanging bracket
(8) Electric wire intake (both sides): For conduit
(9) Air discharge grill (top)
(10) Air discharge grill (rear)
(11) Air discharge grill (both sides)
Capacity characteristic
[Operating conditions]
(1) Liquid temperature sensor: outlet temperature sensor
(2) Control method: Airframe temperature tuning method
(3) Oil used: ISO VG5
Please use it properly Read the manual before using Delivery of the items will be passed on the car.
(Domestic location specified, except islands) will be (additional cost) Charter flights handled separately by the number, type .
Overseas at the time of delivery, we recommend packing for overseas separately.
After verifying the specifications, insert an appropriate breaker (circuit breaker for wiring) between the product and power supply.
Cause of failure and be used at the rated power supply out of range.
Please use the service and maintenance on a regular basis.
Failure to maintain regular maintenance, you may be a factor in product performance degradation trouble.
When disposing of this product, you should comply with various laws and regulations, please go to the appropriate.
We're here to give you quick answers to your questions.