Case studies
Cooling of panel of the straightening machine
A customer who was having trouble with frequent equipment shutdowns due to heat in panel of a straightening machine installed on the mezzanine floor decided to retrofit a filter-less control panel cooling unit. As the ambient temperature was high and they were considering cooler, they chose the filter-less ENC-GR-Pro series, specification the mezzanine floor was a location where filter maintenance was difficult.
Cooling of panel for utility facilities
A customer who is promoting the shift to non-HFC alternative equipment selected a HFC alternative control panel cooling unit. The original fluorocarbon-type cooler required regular inspections every three months and filter replacement, which meant various costs were piling up, so they quickly decided on the ENC-GR-Pro series, which is not only HFC alternative, but also filter-less and inverter control for high energy efficiency.
Cooling panel of a metal processing line
Following the replacement of the existing cooler, HFC alternative, energy-saving control panel cooling unit was adopted. In order to protect the global environment, the adoption of not only HFC alternative but also energy-saving products is increasing year by year. Equipped with a independently developed inverter, it operates at the minimum necessary level, reducing power consumption by up to 55% compared to conventional on/off control models.
Cooling the CPU board of the transport device
The company chose a ceiling-mounted, filter-less, and energy-saving control panel cooling unit to replace the aging of its existing control panel cooling unit. The ENC-GR-Pro series was chosen to address the issue of filter maintenance often being put off with ceiling-mounted coolers, and to match the company's energy-saving initiatives.
Cooling of panel of the transport device
A customer who is systematically switching to HFC alternative control panel cooling unit has adopted the latest model, the ENC-GR-Pro series. The customer is continually moving toward non HFC alternative coolers from various perspectives, including the ever-increasing cost of managing fluorocarbons and their impact on global warming. filter-less, energy-saving design of this product has also been well-received as an environment friendly product.
Cooling of outdoor panel
Our outdoor specification control panel cooling unit are used to cool power conditioner panels. Outdoor equipment is subject to greater solar heat radiation from direct sunlight, making this an application with a higher need for heat countermeasures than indoor equipment. Our outdoor specification control panel cooling unit use stainless steel for their outer panels. The internal structure is also designed to be rust-resistant, with resin paint applied to refrigerant piping and cathodic electrodeposition coating of resin-containing paint on the condenser, so you can use them with confidence.
If you viewed this page, you also checked out these documents:
Inquiry
For product inquiries, quote requests, etc.
Please feel free to contact us.