1. HOME
  2. Enclosure Cooling Unit ENC Series
  3. Model list
  4. ENC-GR1000L-SUS
制御盤用クーラー 屋外制御盤用クーラー(ノンフロン) ENC-GR1000L-SUS
CE UL CCC

屋外制御盤用クーラー(ノンフロン)
ENC-GR1000L-SUS

*For safety standards for the ENC-GR-eco series/SUS series, please contact our sales representatives.

Cooling Capacity(W)*1 1000
Rated voltage(V) Single-phase 200 to 240V AC
Mounting Type Side-mounting
External Dimensions(mm) H1070×W400×D99
Weight(kg) 25

Contact Us

Download

For those who are already using our products

ENC-GR1000L-SUS Product details

(50/60Hz)

Mounting Type Side-mounting
Cooling Capacity(W)*1 1000
Setting Temperature Range (℃) 25~45
Ambient Temperature(℃) -5~55
Ambient humidity(%RH) 10~85 (No condensation)
External Dimensions(mm) H1070×W400×D99
Weight(kg) 25
Surface Finish SUS-HL finish
Rated voltage(V) Single-phase 200 to 240V AC
current consumption: rating (A) * 3.2/3.0
Current consumption *3 : Max(A) *5 4.2/4.0
power consumption: rating (W) * 500
Power consumption *3 : Max(W) *5 660
Recommended breaker capacity (A) 10
Vibration Resistance Equivalent to JIS Z0200 Level1
Dust and Water Proof Protection Rating IPX4 (product only) IP54 equivalent (internal circulation route)
Certification CE / UL / CCC
Refrigerant Types R1234yf
Refrigerant Filling Amount (g) 350
Noise (dB(A)) 約78
External output alarm output (non-voltage a contact: 250V 2A resistive load) can be switched to non-voltage b contact by setting
Display Panel temperature/Error/RUN

* cooling capacity: rating capacity values at ambient temperature 35°C, humidity 40%RH, power-supply voltage 200V. (Measurement conditions: JIS B 8615-1 indoor side air enthalpy test method)
* Use Area Temperature / use area Humidity specify the operating range and do not guarantee rating performance.
* rating values: rating values at ambient temperature 35°C and humidity 40%RH and power-supply voltage 200V.
*MAX value: The ambient temperature at MAX value is specified respectively.
*Use power-supply voltage within ±10% of rated voltage.
current consumption and power consumption are the values at the time of cooling operation.
*Dustproof and drip-proof protection grade: (product alone) excluding the inside mounting surface of the board/(internal circulation route) excluding the drain pipe part
Please read the instruction manual carefully before use and use the product correctly.

External dimensions

ENC-GR1000L-SUS External dimensions

Installation dimensions

ENC-GR1000L-SUS installation dimensions

Capacity characteristic chart

ENC-GR1000L-SUS cooling capacity characteristic graph

*Contact our sales representative if you are using the control panel cooler in an environment close to the permissible ambient temperature upper limit.

【Note】
Please read the instruction manual before use and use the product correctly.
◯Products will be delivered to the vehicle (at designated locations within Japan, excluding remote islands).
Depending on model and number of units, a separate charter service (additional fees apply) may be required.
◯For overseas deliveries, we recommend using separate overseas packaging.
Please check specification of Enclosure Cooling Unit and install an appropriate circuit breaker (wiring breaker) between Enclosure Cooling Unit and power supply.
Using the device outside of rating power supply range may cause malfunctions.
Please perform regular maintenance.
Neglecting regular maintenance can lead to product performance degradation and malfunctions.
◯During winter when outside temperatures are low, do not operate Enclosure Cooling Unit continuously.
When disposal of this product, please do so in accordance with all applicable laws and regulations.

オプション・メンテナンス部品

型式 名称 区分 見積依頼
ドレンホースバンド   オプション この型式で見積を依頼する
盤用アイフランジ(φ100)   オプション この型式で見積を依頼する
ダクト(φ150)   オプション この型式で見積を依頼する
盤用アイフランジ(φ150)   オプション この型式で見積を依頼する
ダクト(φ200)   オプション この型式で見積を依頼する
バンド(φ150)   オプション この型式で見積を依頼する
ドレンホース(φ20)   オプション この型式で見積を依頼する
風向ルーバー1   オプション この型式で見積を依頼する
盤用アイフランジ(φ200)   オプション この型式で見積を依頼する
ダクト(φ100)   オプション この型式で見積を依頼する
バンド(φ100)   オプション この型式で見積を依頼する
バンド(φ200)   オプション この型式で見積を依頼する
OP-9010110 盤外側ファンモーター メンテナンス部品 この型式で見積を依頼する
OP-9010103 盤内側ファンモーター メンテナンス部品 この型式で見積を依頼する

If you need help selecting a product or would like to discuss implementation,
please feel free to contact us.

Contact Us

Please feel free to contact us with any questions about our products or to request a quotation.
​

TEL: 0120-945-354

This service is not available from some IP phones.

support_overseas@apiste.co.jp